Posted on Sunday, 19th April 2009 by Jimmy Auw
I dig my tube boxes and found this old tube. Not a really expensive or most wanted tube, yeah… just an old Western Electric 393A tube. It’s a Argon and Mercury Vapor filled Thyratron tube. According to the datasheet, the addition of Argon gas on the Mercury Vapor atmosphere allows the tube to start conducting at low temperature. Ok, forget those technical literature, just watch the tube in action.
I heat up the tube for a while. According to the manual, to maintain the life span, it’s recommended to heat it up first. I give around 3-4 minutes. You can see the filament is glowing inside the metal bracket on the center of the tube.
Time for action, activate the High Voltage… Voila, the sky of blue on the top of the tube. Very beautiful!!! You still can see the red filament glowing inside the blue Mercury atmosphere.
Tags: glowing, Mercury, tube, tube tester
Posted in Collectible Stuff | Comments (8)




When Cardas SRCA Meets Duelund 2.0 Rev 2 Interconnect
Stockholm Cathedral Choir: Now The Green Blade Riseth
Are You Thinking What I’m Thinking?
Tube Rectifier Filament Supply Selector
Various Artists: This is K2 HD Sound!
Terratec Aureon FireWire 7.1 Mod (II)
Terratec Aureon FireWire 7.1 Mod
Good Bye Eyang Gesang (and also Fritz Sennheiser)
Burn-in Rig Before Battle
Resistor Orientation on the Oscilloscope
Observing Inner and Outer Foil of Some Popular Capacitors
Wear Out Tube…