Posted on Tuesday, 23rd March 2010 by Auw Jimmy
I acquired another varian of Jensen Film Caps, the Copper Tube. Basically, Jensen has 4 enclosure models, the cheap Aluminum Tube, then the Paper Tube, Copper Tube, and Ceramic Tube. So far, I have no interest (or budget) to try the Ceramic Tube, so I take the Copper Tube (hope I made a good decision).
Inside, all of them should be the same. Just the enclosure is different. But I note a significant different in weight between the Aluminum Tube and the Paper or Copper Tube.
After several hours of break-in session, soon I will held a session between my favorite Paper Tube vs Copper Tube. This should be interesting, since Copper Tube is more expensive, and should provide an advantage – less interference, thanks to the Copper natural behavior.
But we must wait several days, or week, until they pass the break-in period.

Tags: Capacitor, copper tube, jensen, paper tube
Posted in Collectible Stuff | Comments (26)


Potting the Lundahl Choke [Part 2]
Potting the Lundahl Choke [Part 1]
Vintage Passion
Custom PCB for Yamamoto 9Pin Teflon
Jensen Copper Foil Paper-In-Oil Ceramic
DPDT Switch with Center Off from the
Trio Tamura Choke
Yamamoto Teflon Tube Socket
Bintaro DIY DAC Competition
Cleaning Up DACT Stepped Attenuator
Nanaboshi Circular Connector
IHEAC Grand Prix Blind Test [1]: DAC